HSM Steels Private Limited

HR Coils in Hyderabad — Hot Rolled Coil Supplier

HSM Steels supplies hot rolled (HR) coils in Hyderabad in grades E250 BR and E350 BR to IS 2062. We are an authorised SAIL distributor for HR products in Telangana, and we also stock NMDC and Evonith coil.

HR coil is kept in ready stock, and we can open and cut it to your lengths or slit it to your widths in our own unit before it leaves the yard.

Steel coil lifted by a coil hook in a warehouse

Specifications

ProductHot rolled coil (HR coil, HRC)
StandardIS 2062
GradesE250 BR, E350 BR
Thickness1.6 mm to 25 mm
Widths1250 mm, 1500 mm, 1600 mm, 1800 mm, 2000 mm and 2500 mm
BrandsSAIL (authorised distributor), NMDC, Evonith
Processing availableCut to length, slitting, shearing
CertificationMill test certificate with every order

Need a width that is not on this list? We slit coil to your width in our own unit.

Which grade do you need?

E250 BR

250

Use it for

The standard general-purpose grade. Suits most fabrication, general structural work and further processing.

E350 BR

350

Use it for

Stronger. Used where the design calls for higher strength, or where you want to use less material to carry the same load.

The number after the “E” is the yield strength — roughly how much load the steel takes before it permanently stretches. The letters after it show how the steel was impact tested for toughness; BR means tested at room temperature, which covers normal Indian site conditions.

Not sure which one your drawing needs? Tell us what you are making and we will help you match it.

What HR coil is used for

Coil or cut sheet —

which is better for you?

If you need a lot of the same material, buying coil and having it cut is usually more economical than buying pre-cut plate — you are paying for the material, not the handling, and you get exactly the lengths you want.

If you need material by the piece, or only a small quantity, HR plates and sheets are simpler.

You do not have to decide alone. Tell us what you are making and how much you need, and we will tell you which way works out better.

Steel sheets and long products stored in a warehouse

We can cut it to your size

Our own de-coiling unit means coil does not have to leave here as a full coil:

  • Cut to length — opened and cut to the exact lengths you need
  • Slitting — cut down to narrower widths
  • Shearing — cut to finished sizes

Ordering it processed means less offcut waste at your end and less handling in your workshop.

Genuine material,

with the certificate

As an authorised SAIL distributor for HR products, we buy this material directly through SAIL’s own channel rather than from the open market. NMDC and Evonith coil is also sourced directly from the mill.

Every coil we supply comes with the mill test certificate for that batch and full traceability back to the mill. You do not have to ask for it.

Get today's HR coil rate

Send us the grade, thickness, width and quantity, plus your delivery location, and we will come back with today’s rate and confirm what is in stock.

Example: “HR coil, E250 BR, 5 mm, 1500 mm wide, 10 tonnes, delivery to Balanagar.”

Frequently Asked Questions

What is HR coil?

HR coil, or hot rolled coil, is steel rolled at high temperature and wound into a coil. It is the base material for a great deal of fabrication and further processing — it can be cut into sheets, slit into strips, or formed into pipes and sections. It has a slightly rough dark grey surface and is the most economical way to buy steel in volume.

We stock E250 BR and E350 BR to IS 2062. E250 BR is the standard general-purpose grade, and E350 BR is stronger for designs that need higher strength. Tell us your application and we will help you choose.

We stock HR coil from 1.6 mm to 25 mm thick, in widths of 1250 mm, 1500 mm, 1600 mm, 1800 mm, 2000 mm and 2500 mm. If you need a narrower width, we slit coil to size in our own unit. Tell us the size you need and we will confirm what is in stock today.

SAIL, NMDC and Evonith. We are the authorised SAIL distributor for HR products, which means SAIL material is bought directly through SAIL’s own supply channel. Tell us if you have a preferred brand and we will confirm availability.

Can you cut HR coil to length or slit it to width?

Yes. We have our own de-coiling unit, so coil can be cut to your exact lengths or slit to narrower widths before dispatch. Send us the finished sizes you need and we will quote for the material and the processing together.

If you need a large quantity of the same material, buying coil and having it cut is usually more economical, because you pay for the material rather than the handling and you get the exact lengths you want. For smaller quantities or material by the piece, cut plates and sheets are simpler. Tell us your requirement and we will advise which works out better.

Coil weight varies with the thickness, width and the mill it came from, so there is no single figure. Tell us the size you are looking at and we will tell you the coil weights currently available, or supply a cut quantity instead if a full coil is more than you need.

Yes, automatically, with every order and every brand. Each coil is supplied with the mill test certificate for that batch and full traceability back to the mill.

HR coil rates change daily and depend on the grade, thickness, width, quantity and mill. Send us your requirement on WhatsApp at +91 93912 35102 or call +91 89782 24740 and we will give you today’s exact rate along with current availability.

Scroll to Top